RCB-650 is made of high-strength copper alloy (CuZn25Al5, CuZn24Al6Fe3Mn4, SAE430B, HBsC4) as the base material, and the holes are machined and filled with solid lubricant on the working surface according to a certain ratio according to the working conditions, the high-strength copper alloy provides high load carrying capacity and the solid lubricant can form a low friction side. Under dry friction conditions we design a pre-lubrication film on the bearing surface which ensures that the solid lubricant is transferred to the counterpart in the shortest possible time and forms an effective solid lubrication film.

Flange Copper Bushings Material Characteristics.

　　-Can be used for a long time without maintenance;

　　-Designed for very high static and dynamic loads;

　　-Low and smooth coefficient of friction, no "sticking";

　　-Resistant to dust, corrosion, impact and edge loading;

　　-Metal substrate with good vibration absorption;

　   -Can be used over a wide temperature range;

　　-Suitable for reciprocating, rotating and oscillating applications with frequent start-ups and where it is difficult to form an oil film;

　　-has an extremely low wear rate and a long service life.

• 电话不能为空

• 邮箱不能为空
• 验证码不能为空

• 留言内容不能为空